The main function of enclosure is to block and prompt, and it is also convenient to use, because it is easy to disassemble, and it has a long service life. Because its material is durable and not easy to fade, the main material of iron enclosure is color steel plate, At present, the Standard Version (1.8m high, 2.0m wide, 0.2cm thick, and the quotation of Huacheng Tianxing manufacturer for iron sheet enclosure) affects the price of iron sheet enclosure based on the thickness of color steel plate, which is determined according to the rigid needs of individual customers. The advantage is that it is convenient to disassemble and cheap.

鐵皮圍擋安裝說明：

Installation instructions of iron sheet enclosure:

1、鐵皮圍檔安裝前通常是土建已形成交付磚砌或砼澆搗的下部基礎，可采用機械式脹栓、化學螺檢等方式將立柱鋼襯底板固定在下部基礎的中心部位作直線均布。

1. Before the installation of iron sheet enclosure, the lower Foundation delivered for brick masonry or concrete pouring and tamping has usually been formed by civil engineering. The column steel lining bottom plate can be fixed in the center of the lower foundation by means of mechanical expansion bolt and chemical screw inspection for straight-line uniform distribution.

2、如圍檔的下部基礎尚未形成，建議將立柱鋼襯增加長度直接預埋在墻**,待墻體養護期后即可正式施工；或預制預埋件敷設在墻體平面以后將立柱鋼襯用電焊方式與預埋焊接，這兩種方式特點是較螺栓連接更為牢固，但預設時必須注意直線與水平線。

2. If the lower foundation of the enclosure has not been formed, it is recommended to increase the length of the column steel lining and directly embed it in the wall * *, and the formal construction can be carried out after the wall curing period; Or after the prefabricated embedded parts are laid on the wall plane, the steel lining of the column is welded with the embedded by electric welding. These two methods are characterized by firmer connection than bolts, but attention must be paid to the straight line and horizontal line during preset.

3、立柱鋼襯的間距須與設計尺寸一致，保證預裝配的半成品能與之連接。

3. The spacing of column steel lining shall be consistent with the design size to ensure that the pre assembled semi-finished products can be connected with it.

4、施工區、生活區圍擋在市區一般不低于2.5m,其他地方一般不低于1.8m.

4. The enclosure of construction area and living area is generally not less than 2.5m in urban area and 1.8m in other places

5、彩鋼圍擋高度不宜超過2.5m,立柱間距不宜大于3.6m,施工活動圍擋應進行抗風計算。

5. The height of color steel enclosure shall not exceed 2.5m, and the spacing between columns shall not be greater than 3.6m. The wind resistance of construction activity enclosure shall be calculated.

以上就是濟南圍擋給大家分享的主要內容，更多的精彩內容請大家繼續關注我們：http://www.antsf.com

The above is the main content of Jinan enclosure to share with you. Please continue to pay attention to us for more wonderful content: http://www.antsf.com